- Home
- Products
- Milling / Drilling Machine
- RF-45 / 45N2F / RF-45N2F + DRO
Milling / Drilling Machine
Item | Unit | RF-45 | RF-45N2F | RF-45N2F+DOR | |
---|---|---|---|---|---|
Main Motor | HP | 1 (3-Phase) / 1.5 (1-Phase) | |||
Speed | 1 Speed Motor (standard) |
rpm | 60Hz 65~1550 50Hz 55~1260 (6 speeds) |
||
2 Speed Motor (optional) |
rpm | 60Hz 65~3100 50Hz 55~2520 (12 speeds) |
|||
Taper | MT3 or R8 | ||||
Stroke | mm | 130 | 107 | 107 | |
Depth | mm | 255 | |||
Table Size | mm | 820 × 240 | |||
X Travel | mm | 520 | |||
Y Travel | mm | 210 | |||
Column Diameter | mm | - | |||
No. of T Slot | 4 | ||||
Coolant Pump | mm | - | |||
Packing Dimensions(w/o stand) | mm (L x W x H) |
915 × 737 × 1194 | |||
Machine Weight(w/o stand) | NW/GW | 330 / 360 kgs | |||
725 / 795 lbs | |||||
20'/40' Loaded Units | 18/36 Units |
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY | ||
---|---|---|
In Mild Steel | Drilling | 40mm (11/2") |
Face Mill | 100mm (4") | |
End Mill | 20mm (3/4") | |
Tapping (Optional) | 20mm (3/4") | |
In Light Alloy | 40mm (11/2") |
FACE MILLING CUTTER

Description
Available with different inch/metric size for your selection.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
TAPPING CONTROL

Description
Tapping function for more operation convenience.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
DRILL CHUCK AND KEY

Description
Available with different inch/metric size for your selection.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
DIGITAL READOUT

Description
East to read the figure form the control panel
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
3" U TYPE ANGLE VISE

Description
This angle vise can clamp the workpiece with preferred angles and very easy to use.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
CHUCK GUARD FOR MILL DRILL

Description
The guard can protect operator from flying chips during working.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
HALOGEN LIGHT

Description
The halogen light can illuminate the working enviroment with better sight.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
POWER TABLE FEED

Description
It can be installed on mill/drill machine for conveniently feeding the workpiece.
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
COOLANT SYSTEM

Description
Good for drill presses, Mill/drill , Bandsaw, Milling machine)
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
DELUXE STAND

Description
FOR RF-25, RF-31, RF-40, RF-45 SERIES
- The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.