Milling / Drilling Machine

RF-40S2F / 40C2F

Product Name : RF-40S2F / 40C2F
Product Description
Geard Head Floor Type Milling Drilling Machine W/Powerdown Feed

S2F = Square Table + Spindle Power Down Feed 0.12 – 0.18 –0.25mm per/rev.

C2F = Cross Table + Spindle Power Down Feed 0.12 – 0.18 –0.25mm per/rev.

  • Heavy duty design allows a variety of precision drilling applications.
  • With powerdown feed.
  • Calibrated fine down feed built in.
  • Built in spindle lock. Head tilts left or right.
  • Easy accessible table raiser.
  • Optional:Tapping switch, work light, table power feed( for 40C2F only).
ItemUnitRF-40C2FRF-40S2F
Main Motor HP 1 (3-Phase) / 1.5 (1-Phase)
Speed 1 Speed Motor
(standard)
rpm 60Hz 65~1550 50Hz 55~1260
(6 speeds)
2 Speed Motor
(optional)
rpm 60Hz 65~3100 50Hz 55~2520
(12 speeds)
Taper   MT3 or R8
Stroke mm 107
Depth mm 260
Table Size mm 585x190(Cross Table)
555x495(Square Table)
X Travel mm 380 -
Y Travel mm 180 -
Column Diameter mm Ø115
No. of T Slot   4 2
T Slot Size mm 14 x 24 16 x 26
Packing Dimensions mm
(L x W x H)
830 x 740 x 1860
Machine Weight NW/GW 295 / 325 kgs 285 / 315 kgs
650 / 715 lbs 630 / 695 lbs
20'/40' Loaded Units   21/42 Units
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
In Mild Steel Drilling 40mm (11/2")
Face Mill 100mm (4")
End Mill 20mm (3/4")
Tapping (Optional) 20mm (3/4")
In Light Alloy   40mm (11/2")

Coolant System

Power Table Feed

Halogen Light

Chuck Guard For Mill Drill

3" U Type Angle Vise

Drill Chuck And Key

Tapping Control

Face Milling Cutter

FACE MILLING CUTTER

Face-Milling-Cutter

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

POWER TABLE FEED

Power-Table-Feed

Description

It can be installed on mill/drill machine for conveniently feeding the workpiece.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
News
TIMTOS 2021
TIMTOS 2021
I agree