• Equipped with cooling system.
  • Slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
  • All castings are FC25 high quality material, anneal treated to relieve internal stress.
  • Oversize column ensures maximum rigidity and stability widely spaced base structure.
  • Centralized contral panel minimizes operation fatigue while permitting efficient operation.
  • Rugged Saddle
  • The spindle runs on precision bearings for long term high speed running, heavy duty cutting and maximum stability.
  • The X and Y axes are transmitted by precision screws.  Combined with preloaded double nuts for extremely smooth ,high precision working and minimum backlash.
  • The gears are hardened and precision ground.
  • Belt drive milling head.
  • Milling Head can tilts 90 degree right and left; 45 degree back and forward.
  • Feed change with inverter for variable speed change which design is easy to change speed.( For 4EVS, 4HEVS )
  • Machine base, stand and table are made by MEEHANITE Cast Iron construction.
  • Automotic Lubrication System is optional.
  • Table Power Feed for X, Y axis are optional equipment.
  • The knee elevation is driven by an individual motor for convenient operation. ( Optional )
Drilling Capacity in Cast Iron OD-24mm
Drilling Capacity in Steel OD-20mm
Capacity face milling OD-100mm/3.5mm
Capacity end milling OD-20mm/6mm
Spindle Taper NT 40
Diameter of Quill 105mm
Number of Spindle Speeds 8
Range of Spindle Speeds (50HZ) 70-3,600 rpm
Range of Spindle Speeds (60HZ) 80-4,000 rpm
Power Down Feed per Revolutions of Spindle 0.04/0.08/0.15
Number of Power Feeds 3
Spindle Travel 127mm
Head Movement (L to R) 90 degrees
Head Tilt 45 degrees
Max. Distance Spindle to Table 40-446mm
Max. Distance Spindle to Column 680mm
Min. Distance Spindle to Column 200mm
Collet Capacity 3-22mm
Size of Table 254x1270mm
Longitudinal Table Travel / X-Axis 760mm
Cross Table Travel / Y-Axis 380mm
Number of T-Slots 3
T-Slot Size 16mm
T-Slot Centers 64mm
Max. Weight of Workpiece 380kg
Travel of Knee 380mm
Overarm Travel 440mm
Overall Dimensions Wx Dx H 2433 x 1750 x 2200mm
Horse Power for Main Motor 3.75kw (5HP)
Shipping Weight (approx.) 1315kg
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
Control Switch Box w/Rotary Arm
With Chip Tray on Base
Coolant Pump System
Levels and pads included
24V Work Lamp System
Air Power Draw Bar
CE Spindle Guard Accessory
X axis table power feeder
Turcide-B for X/Y axis movement.
Table Up-Down with the Electrical Power system





The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.