Milling Machine RFM-3VS



  • Equipped with cooling system.
  • Slideways are hardened, precision ground, then coated with TURCITE-B for maximum wear resistance.
  • All castings are FC25 high quality material, anneal treated to relieve internal stress.
  • Oversize column ensures maximum rigidity and stability widely spaced base structure.
  • Centralized control panel minimizes operation fatigue while permitting efficient operation.
  • Rugged Saddle
  • The spindle runs on precision bearings for long term high speed running, heavy duty cutting and maximum stability.
  • The X and Y axes are transmitted by precision screws. Combined with preloaded double nuts for extremely smooth ,high precision working and minimum backlash.
  • The gears are hardened and precision ground.
  • Belt drive milling head.
  • Milling Head can tilt 90 degree right and left; 45 degree back and forward.
  • Spindle speed change with inverter which design is easy to change speed. (For 3EVS)
  • Machine base, stand and table are made by MEEHANITE Cast Iron construction.
  • Automatic Lubrication System is optional.
  • Table Power Feed for X, Y axis are optional equipment.
Drilling Capacity in Cast Iron OD-18mm
Drilling Capacity in Steel OD-15mm
Capacity face milling OD-75mm/2.5mm
Capacity end milling OD-20mm/6mm
Spindle Taper R8/NT- 30
Diameter of Quill 85mm
Number of Spindle Speeds Variable (INVERTER)
Range of Spindle Speeds (50HZ) 0-4,500 rpm
Range of Spindle Speeds (60HZ) 0-4,500 rpm
Power Down Feed per Revolutions of Spindle 0.04/0.08/0.15mm/rev.
Number of Power Feeds 3
Spindle Travel 127mm
Head Movement (L to R) 90 degrees
Head Tilt 45 degrees
Max. Distance Spindle to Table 50-400mm
Max. Distance Spindle to Column 630mm
Min. Distance Spindle to Column 250mm
Collet Capacity 3mm-16mm
Size of Table 252mmx1115mm
Longitudinal Table Travel / X-Axis 600mm
Cross Table Travel / Y-Axis 380mm
Number of T-Slots 3
T-Slot Size 16mm
T-Slot Centers 64mm
Max. Weight of Workpiece 380kg
Travel of Knee 406mm
Overarm Travel 320mm
Overall Dimensions Wx Dx H 1570x1560x2200mm
Horse Power for Main Motor 2.2kw (3HP)
Shipping Weight (approx.) 1262kg
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
Control Switch Box w/Rotary Arm
With Chip Tray on Base
Coolant Pump System
Levels and pads included
24V Work Lamp System
Turcide-B for X/Y axis movement.
Air Power Draw Bar
CE Spindle Guard Accessory
X axis table power feeder





The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.