Milling Machine RF-500S

RF-500S

(Square Table)

RF-500C

(Cross Table)

HEAVY DUTY GEARD HEAD FLOOR TYPE MILLING DRILLING MACHINE

Heavy Duty Geared Head Spindle Power Down Feed 0.1 – 0.2 – 0.3 – 0.4mm per/rev
  • Heavy duty geared head drilling machine , 50mm drill capacity with 200mm of spindle tarvel, 50rpm low speed for heavy drilling.
  • Cross work table tilts to  +/-90º and rotates 360º(RF-500C), coolant base system,
  • Forward and reverse spindle switch with high and low speeds.
  • Optional : Tapping Switch.
Item Unit RF-500S RF-500C
Main Motor HP 4 (3-Phase)
Speed rpm 60Hz 60~1810, 50Hz 50~1510
(6 speeds)
Taper   MT4
Stroke mm 200
Depth mm 340
Table Size mm 600 x 600 820 x 240 (Swivel)
X Travel mm - 460
Y Travel mm - 280
Column Diameter mm Ø180
No. of T Slot   2 4
T Slot Size mm 22 x 35 16 x 26
Coolant Pump   1 / 8HP
Packing Dimensions mm
(L x W x H)
1130 x 740 x 2210 1130 x 1120 x 2210
Machine Weight NW/GW 750 / 800 kgs
1650 / 1760 lbs
No. of Machines
Packed in 20" container
20' 15 sets 10 sets (motor dismounted)
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
In Mild Steel(Optional) Drilling 50mm (2")
Face Mill 100mm (4")
End Mill 25mm (1")
Tapping 33mm (15/16")
In Light Alloy   50mm (2")

COOLANT SYSTEM

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DRILL CHUCK AND KEY

TAPPING CONTROL

FACE MILLING CUTTER

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

FACE MILLING CUTTER

Face-Milling-Cutter

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.