RF-46SF

Heavy Duty Geared Head Spindle Power Down Feed

0.12 – 0.18 – 0.25mm per/rev Hardened MT4 Spindle / Coolant Base
  • This feature packed machine is ready for your shop.
  • Comes with a coolant pump, powerdown feed,and easy selection speed controls.
  • What's more, the gear head can be repositioned along the column for expanded capacity when work is mounted on the base.
  • Desinged to withstand the most demanding jobs.
  • Optional : tapping switch, work light.
  • Optional : cross table for RF-46CF.
Item Unit RF-46SF
Main Motor HP 1.5
Speed 1 Speed Motor
(standard)
rpm 60Hz 65~1550
50Hz 55~1260 (6 speeds)
2 Speed Motor
(optional)
rpm 60Hz 65~3100
50Hz 55~2520 (12 speeds)
Taper   MT4
Stroke mm 107
Depth mm 260
Table Size mm 555 x 495
X Travel mm -
Y Travel mm -
Column Diameter mm Ø115
No. of T Slot   2
Coolant Pump mm 1/8HP
Packing Dimensions mm
(L x W x H)
915 x 762 x 2083
Machine Weight NW/GW 310 / 340 kgs
685 / 750 lbs
No. of Machines
Packed in 20" container
20' 18 sets
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
In Mild Steel(Optional) Drilling 40mm (11/2")
Face Mill 100mm (4")
End Mill 25mm (1")
Tapping 22mm (7/8")
In Light Alloy   50mm (2")

COOLANT SYSTEM

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DRILL CHUCK AND KEY

TAPPING CONTROL

FACE MILLING CUTTER

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

FACE MILLING CUTTER

Face-Milling-Cutter

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.