Milling Machine RF-45VN2F

RF-45VN2F+DRO

GEAR HEAD BENCH TYPE VARIABLE SPEED MILLING DRILLING MACHINE,
W/POWERDOWN FEED AND DRO SYSTEM

Spindle Power Down Feed 0.12 – 0.18 – 0.25mm per/rev
  • Geared Head Milling/drilling machine with VARIABLE speed.
  • Full power to the cutting tool through 6 speed geared head.
  • Square column with dovetail ways.
  • Tilting head 90° left and 30° right.
  • Powerdown feed and DRO system installed for more precise working.
  • Optional:deluxe stand, tapping switch, coolant system, work light, table power feed.
Item Unit RF-45VN2F+DRO
Main Motor HP Motor 1.5HP (3-Phase) / PRW 110V or 220V (1-Phase only)
Speed rpm 0~2500
Taper   MT3 or R8(Optional MT4)
Stroke mm 107
Depth mm 255
Table Size mm 820 × 240
X Travel mm 520
Y Travel mm 210
Column Diameter mm -
No. of T Slot   4
T Slot Size mm 16x26
Coolant Pump   -
Packing Dimensions(w/o stand) mm
(L x W x H)
915 × 737 × 1194
Machine Weight(w/o stand) NW/GW 330 / 360 kgs
725 / 795 lbs
No. of Machines
Packed in 20" container
(w/o stand)
20' 18 sets
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
In Mild Steel(Optional)  Drilling 40mm (11/2")
Face Mill 100mm (4")
End Mill 20mm (3/4")
Tapping 20mm (3/4")
In Light Alloy   40mm (11/2")

DELUXE STAND

COOLANT SYSTEM

POWER TABLE FEED

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DIGITAL READOUT

DRILL CHUCK AND KEY

TAPPING CONTROL

FACE MILLING CUTTER

DELUXE STAND

Deluxe-Stand

Description

FOR RF-45VN2F, RF-45VN2F, RF-45VN2F, RF-45VN2F SERIES

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

POWER TABLE FEED

Power-Table-Feed

Description

It can be installed on mill/drill machine for conveniently feeding the workpiece.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DIGITAL READOUT

Digital-Readout

Description

East to read the figure form the control panel

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

FACE MILLING CUTTER

Face-Milling-Cutter

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.