Milling Machine RF-40HC

(Cross Table)

RF-40HC

(Cross Table)

RF-40HS

(Square Table)

GEARD HEAD FLOOR TYPE MILLING DRILLING MACHINE

  • This fine quality machine offers maximum versatility.
  • Can be used for milling, drilling, routing, boring, cutting keyways and many other routine light-duty operations.
  • Ideally suited for home or machine and maintenance shops. Rigid construction.
  • Heavy duty column.
  • Massive head casting.
  • Head swivel 360°.
  • Optional:Tapping switch, work light, table power feed( for 40HC only).
Item Unit RF-40HC RF-40HS
Main Motor HP 1 (3-Phase) / 1.5 (1-Phase)
Speed 1 Speed Motor
(standard)
rpm 60Hz 65~1550 50Hz 55~1260
(6 speeds)
2 Speed Motor
(optional)
rpm 60Hz 65~3100 50Hz 55~2520
(12 speeds)
Taper   MT3 or R8
Stroke mm 130
Depth mm 260
Table Size mm 585 x 190
(Cross Table)
555 x 495
(Square Table)
X Travel mm 380 -
Y Travel mm 180 -
Column Diameter mm Ø115
No. of T Slot   4 2
T Slot Size mm 14 x 24 16 x 26
Packing Dimensions mm
(L x W x H)
830 x 740 x 1860
Machine Weight NW/GW 280 / 310 kgs 270 / 300 kgs
615 / 685 lbs 595 / 660 lbs
No. of Machines
Packed in 20" container
20' 21 sets
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
In Mild Steel(Optional) Drilling 40mm (11/2")
Face Mill 100mm (4")
End Mill 20mm (3/4")
Tapping 20mm (3/4")
In Light Alloy   40mm (11/2")

COOLANT SYSTEM

POWER TABLE FEED

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DRILL CHUCK AND KEY

TAPPING CONTROL

FACE MILLING CUTTER

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

POWER TABLE FEED

Power-Table-Feed

Description

It can be installed on mill/drill machine for conveniently feeding the workpiece.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

FACE MILLING CUTTER

Face-Milling-Cutter

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.