Drilling Machine RF-720A

RF-720A

Radial Drill

  • Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
  • The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
  • 2HP motor can provide diverse speed selection under heavy-duty cutting.
  • The main spindle is balanced by special spring. And is more durable than all traditional balance mechanism.
  • The over-load protective devices can secure the operator against injury.
  • Extra auxiliary dial for spindle feed depth indication. With this indicator, we can review the momental feed depth of spindle 1through 210mm at any moment.
MODEL RF-720A
Dai.of column 210
Distance from column surface to spindle center , Max 750
Distance from column surface to spindle center , Min 220
Travel of spindle head 530
Distance from base surface to spindle end , Max 1060
Distance from base surface to spindle end , Min 260
Elevating height of Arm 580
Effective area of box table 600x445x380
Dimension of base 1260x640x160
Taper hole spindle MT#4
Stroke of spindle 220
R.P.M of spindle (rpm x steps) 88,154,282,455,796,1500X6 steps
Feed of spindle (rev. x steps) 0.05, 0.09, 0.15x3 steps
Main motor (HP) 2HP
Elevating motor (HP) 1HP
Coolant equipment (HP) 1/8HP
Machine height from floor (Max.) 2170
Base + column height 1850
Net weight (approx)kgs 1120
Shipping weight (approx)kgs 1250
Shipping dimensions (LxWxH) 1680x826x2160
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.
WORKING CAPACITY
Drilling Tapping (Optional) Steel 32mm (1 1/4")
Cast iron 50mm (2")
Steel 25mm (1")
Cast iron 32mm (1 1/4")

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.