Drilling Machine RF-43S

RF-43S

(Square Table)

RF-43SF

(Square Table + Power Down Feed 0.08 – 0.12 – 0.16 – 0.22 mm per/rev.)

RF-43C

(Cross Table)

RF-43CF

(Cross Table + Power Down Feed 0.08 – 0.12 – 0.16 – 0.22 mm per/rev.)

27.6" Drilling Machine

  • 8 speed gearbox with big speed range 75-3140rpm.
  • Helical gears for smooth, quiet operation.
  • Right and left hand rotation allows tapping operations(optional tapping function).
  • MT-3 spindle taper with tool quick eject system.  
  • 150mm long spindle travel.(RF-43S/43C)
  • 107mm long spindle travel.(RF-43SF/43CF)
  • Optional MT#4 spindle taper.
  Unit RF-43S RF-43SF RF-43C RF-43CF
Main Motor HP 2 (3-Phase)
Speed 2 Speed Motor
(standard)
rpm 60Hz 90~3580 50Hz 75~3140
Drilling Capacity mm 32 36 (MT4) 32 36 (MT4)
Taper   MT3 (Optional MT4)
Stroke mm 150 107 150 107
Depth mm 350
Table Size mm 505 x 405 600 x 300
Column Diameter mm Ø120
Spindle Nose To Table mm 950 800
Spindle Nose To Base mm 1300
Quill Diameter mm
Ø62
No. of Power Down feed mm - 4 Step - 4 Step
No. of T Slot   2 7
T Slot Size mm 16 x 26 14 x 24
Packing Dimensions mm
(LxWxH)
1895 x 550 x 950 1895 x 550 x 1010
Machine Weight NW/GW 240 / 270 kgs
530 / 595 lbs
255 / 285 kgs
560 / 630 lbs
260 / 290 kgs
575 / 640 lbs
275 / 305 kgs
605 / 670 lbs
No. of Machines
Packed i n 20” container
20' 24 sets
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

COOLANT SYSTEM

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DRILL CHUCK AND KEY

TAPPING CONTROL

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.