RF-205S

(Square Table)

RF-205SF

(Square Table + Power Down Feed 0.08 – 0.12 – 0.16 – 0.22 mm per/rev.)

RF-205C

(Cross Table)

RF-205CF

(Cross Table + Power Down Feed 0.08 – 0.12 – 0.16 – 0.22 mm per/rev.)

22" Drilling Machine

  • 8 speed gearbox with big speed range 75-3140rpm.
  • Helical gears for smooth, quiet operation.
  • Right and left hand rotation allows tapping operations(optional tapping function).
  • MT-3 spindle taper with tool quick eject system.  
  • 150mm long spindle travel.(RF-205S/205C)
  • 170mm long spindle travel.(RF-205SF/205CF)
  Unit RF-205S RF-205SF RF-205C RF-205CF
Main Motor HP 1.5 (3-Phase)
Speed 2 Speed Motor
(standard)
rpm 60Hz 90~3580 50Hz 75~3140
Drilling Capacity mm 32
Taper   MT3
Stroke mm 150 107 150 107
Depth mm 284
Table Size mm 505 x 405 585 x 190
Column Diameter mm Ø100
Spindle Nose To Table mm 915 780
Spindle Nose To Base mm 1262
Quill Diameter mm
Ø62
No. of Power Down feed mm - 4 Step - 4 Step
No. of T Slot   2 4
T Slot Size mm 16 x 26 14 x 24
Packing Dimensions mm
(LxWxH)
1855 x 570 x 920 1855 x 805 x 1050
Machine Weight NW/GW 220 / 230 kgs
440 / 505 lbs
215 / 245 kgs
475 / 540 lbs
230 / 260 kgs
505 / 575 lbs
245 / 275 kgs
540 / 605 lbs
No. of Machines
Packed i n 20” container
20' 24 sets 12 sets
The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

COOLANT SYSTEM

HALOGEN LIGHT

CHUCK GUARD FOR MILL DRILL

3" U TYPE ANGLE VISE

DRILL CHUCK AND KEY

TAPPING CONTROL

COOLANT SYSTEM

Coolant-System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

HALOGEN LIGHT

Halogen-Light

Description

The halogen light can illuminate the working enviroment with better sight.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

CHUCK GUARD FOR MILL DRILL

Chuck-Guard-For-Mill-Drill

Description

The guard can protect operator from flying chips during working.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

3" U TYPE ANGLE VISE

3U-Angle-Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

DRILL CHUCK AND KEY

Drill-Chuck-And-Key

Description

Available with different inch/metric size for your selection.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.

TAPPING CONTROL

Tapping-Control

Description

Tapping function for more operation convenience.

  • The information contained on the websites is non-binding and cannot be guaranteed to be accurate or up to date.